Aeroneb Nebuliser Controller
The EMMS Aeroneb Nebuliser Controller is an aerosol system designed to control the Aerogen Pro series of nebulisers. The unit can work as a stand alone unit and be controlled manually with the interface that the unit has, as well as be connected to an EMMSLink network and be controlled directly from a computer with eDacq software as well as work in coordination with other EMMSLink devices.
Features:
Compatible with EMMS Inhalation towers, Whole Body Exposure Chambers, In Line Aerosol and many other applications.
Can work as a standalone unit or as part of an EMMSLink network.
Duty cycle can be set from 0 to 100% in 0.1% steps.
Several working modes: Toggle, Momentary and Timed.
Possible to be triggered by a pressure signal to synchronize it with respiration
Can be powered from an EMMSLink network or external power adaptor
Collison Nebuliser
The EMMS Collison Nebuliser is a jet type nebuliser that uses high pressure to generated small droplets. These droplets are pushed upwards together with the air used for the generation and has a port near the output for additional dilution.
The unit is appropriate for a wide range of substances, from water or oil-based solutions, small or large suspensions, as well as viscous substances. It also is capable to produce large quantities of aerosol to feed big inhalation towers.
Features:
Robust Stainless Steel and Tempered Glass construction.
Reservoir can be refilled while being used for continuous operation.
Dilution port included in the unit.
Quick mechanism to dismount it from an EMMS inhalation tower.
Replaceable nozzle with 1 to 6 jets for different applications.
Optimized design for precious liquids for minimum waste.
